北京pk10分析软件用什么好

0514-87979963
Banner
company's product
You are here: Home > News > Content

contact us

Yangzhou Kaihong Power Technology Co., Ltd. (Yangzhou Headquarters)
Sales phone: 0514-87979963
Sales Straight 1: 13773587351
Sales line 2: 18932373905
Sales line 3: 15190420406
Company Fax: 0514-87580922
Sales email: yzkaihong@163.com
Company address: Xi'an Jiaotong University Pioneer Park, East Wuzhou Road, Yangzhou

Introduction of Kaihong Power Technology DC Power System
Editor: Yangzhou Kaihong Power Technology Co., Ltd.Release time: 2019-09-27

The DC power system is mainly composed of two parts. One part is a battery screen and the other is a DC charging screen (DC screen). The battery screen is a cabinet (800 × 600 × 2260) where multiple batteries can be placed. The battery in the battery screen is generally composed of a 2V-12V battery in a series of 9 to 108 cells, and the corresponding voltage output is 110V or 220V. The batteries currently used are mainly valve-regulated sealed maintenance-free lead-acid batteries. The DC screen is mainly distributed by the cabinet, rectifier module system, monitoring system software, insulation monitoring unit, battery inspection unit, switch detection unit, step-down unit and a series of AC input, DC output, voltage display, current display and other power distribution. unit.

The power rectifier module is a stand-alone module that rectifies AC power to DC power. It is usually rated by the current (such as 2A module, 5A module, 10A module, 20A module, etc.). It can also be divided into: Cooling module, independent air duct module, self-cooling module, self-energy air-cooling module and self-energy self-cooling module. It can be used in parallel with multiple units to achieve N1 redundancy. The output of the module is a stable and adjustable DC voltage of 110V and 220V. The module itself has relatively complete protection functions such as: input over-voltage protection, output over-voltage protection, output current-limit protection, and output short-circuit protection.

The monitoring system software is the core of the control and management of the entire DC power system. Its main tasks are: long-term automatic monitoring of various functional units and batteries in the system, obtaining various operating parameters and status in the system, and timely in accordance with the measured data and operating status. Process and use this as a basis to control the system to achieve fully automatic management of the DC power system to ensure its continuity, reliability and safety. The monitoring system software is currently divided into two types: one is a button type and the other is a touch screen type. The monitoring system software provides a man-machine interface to realize the display of system operating parameters, system control operations and system parameter settings.

The DC power system insulation monitoring unit is a device that monitors the insulation status of the DC system. It can monitor the line-to-ground leakage resistance in real time. When the line-to-ground insulation decreases to a set value, an alarm signal is issued. DC system insulation monitoring unit currently has bus insulation monitoring and branch insulation monitoring.

The battery patrol unit is a kind of equipment that patrols the online voltage of the battery. It can detect the voltage of each battery in real time. When the battery voltage is higher or lower than the setting, an alarm signal will be issued, and the battery fault will be displayed by the DC power monitoring system software. The battery inspection unit can generally detect 2V-12V batteries and 1-108 batteries.


High voltage power supply manufacturers | High voltage linear power supply | High power DC regulated power supply | High power adjustable power supply | AC and DC power supply | DC pulse power supply | High power high voltage power

Copyright: Yangzhou Kaihong Power Technology Co., Ltd. Technical support: Yangzhou Fanke Network Technology Co., Ltd. 苏 ICP 备 17010109 号 -2 Mobile version